A popular expression in recent times has been “strength lies in differences, not similarities” and although this may sound contrary […]
Author: Diesel and Marine Group
Diesel and Marine Group welcomes Alvin Poon
Diesel and Marine Group is pleased to welcome Alvin Poon as Asia Pacific Sales Manager. A specialist in marine engineering […]
Diesel and Marine Group seeking to capture South American markets
After the success of SMM 2018 last September, it was time for Diesel and Marine Group to focus its attention […]
Parker filtration series V: fixing the ends of the element
The ends of the filter elements are attached by hand using a special adhesive (see images below), onto which Parker’s […]
Diesel and Marine Group director presents solution to consistent emissions enforcement at the Sulphur Cap 2020 Conference
Diesel and Marine Group director and European Maritime Independent Suppliers Association (EMISA) board member, James Hogg, presented a strong […]
Parker filtration series IV: loading media into the casing
Once the filter media has been joined into a cylinder, using either a silicone seal or a metal clip, it […]
Simplex-Turbulo to host technical condition monitoring seminar in Dublin
Following a successful seminar in London in March, Simplex-Turbulo is hosting a technical condition monitoring seminar next month at The […]
Parker filtration series III: bonding the filter media
After being pleated and cut to the proper length, the two ends of the filter media are fastened together using […]
Lincoln Diesels appoint new sales representative in the Philippines and Thailand
Lincoln Diesels Ltd is pleased to announce the appointment of Ms. Jhenny Watana as a sales representative and correspondent for […]
Visit to the Parker Hannifin filter factory in Chomutov, Prague
By Natalie Grayson, Purchaser Chomutov is a very quaint town with cobbled streets and lovely architecture. We spent a pleasant […]
Dorman Diesels help customer with broken water pump on a 4LD2
Dorman Diesels aims to help customers around the globe with professionalism and urgency. A good example of this began on […]
Parker filtration series II: spot welding the outer casing
The metal casing of the filter element is comprised of many small holes in order for the fluids to pass […]
First Simplex-Turbulo and Parker Kittiwake condition monitoring seminar ends with great success
Simplex-Turbulo and Parker Kittiwake joined forces on Friday 9th March to provide some of their London-based marine industry customers with […]
Parker filtration series I: creating the filter media
In this series we will be looking at the methods by which Parker produce their high-quality filter elements, following on […]
The manufacturing process of Parker Hannifin filter elements
By Matthew Gibson, Director, Diesel Engine Products I’m responsible for the diesel engine components that we sell at Simplex-Turbulo. We’ve […]
Join us for a technical condition monitoring seminar in London
Simplex-Turbulo is a Marine Master Distributor for Parker Kittiwake, and in the light of this exciting partnership we would like to […]
Service engineer Jim Moody retires after 28 years at Simplex
Long-standing service engineer Jim Moody is retiring after 28 years working for Simplex-Turbulo. A sterntube seal specialist, Jim has been […]
Parker Kittiwake’s ‘Gold Guide’ nominated for the 2018 Smart4Sea Awards
Simplex-Turbulo is pleased to inform our customers that Parker Kittiwake’s Gold Guide has been nominated as a finalist for the […]
Historic Ruston & Hornsby engine put on display in Motor Grande, Puerto Rico
Earlier this month in Puerto Rico, an old Ruston & Hornsby engine was taken from a redundant water reservoir in […]
IMPA London 2017
Simplex-Turbulo attended yet another successful IMPA exhibition in London last week, which saw companies from across the marine purchasing industry […]
Inlet and exhaust valve guides suitable for Nohab F20 diesel engines
Simplex-Turbulo have many of these Inlet and exhaust valve guides in stock suitable for the Nohab F20 diesel engine. These high […]
Simplex face off with DMS technologies in Go-Kart head to head
Dry and shady conditions greeted the competitors for the second Go-Karting competition between DMS technologies of Romsey and Simplex-Turbulo of […]
Thrust bearings suitable for Nohab F20 diesel engines
Simplex-Turbulo have many of these thrust bearings in stock suitable for the Nohab F20 diesel engine. These high quality spare parts […]
Simplex engineer earns high praise after carrying out a shaft arrangement stripping
It’s always with great pleasure and gratitude that Simplex recieves compliments for the performance of its engineers. Last week in […]
Meet FTIR3 – a comprehensive oil and lubricant monitoring system from Parker Kittiwake
Simplex-Turbulo is very pleased to be able to offer this exciting new product from Parker Kittiwake. Featuring a compact, portable […]
Exhaust valve seat (cooled) suitable for MaK M453AK / M453C diesel engines
Simplex-Turbulo have many of these cooled exhaust valve seats in stock suitable for the MaK M453AK / M453C diesel engine. These […]
Dorman Diesels expand support for Perkins 4000 diesel and gas engines
Dorman Diesels has expanded its support for the Perkins 4000 engines, with reconditioned exchange cylinder heads now available for […]
Main bearing pairs suitable for Nohab R25 diesel engines
Simplex-Turbulo have many of these Main Bearing Pairs in stock suitable for the Nohab R25 diesel engine. These high quality […]
Simplex-Turbulo are now offering bunker fuel testing equipment from Parker Kittiwake
Simplex-Turbulo is pleased to announce that it can now offer a range of testing equipment for bunker fuel and other […]
Sterntube seal maintenance carried out in Yalova, Istanbul
Simplex engineer Mike Heddon arrived at the Sefina ship yard in Yalova, Istanbul in February to perform scheduled maintenance work […]