Marine spare parts

Simplex-Turbulo is the UK agent for SKF Marine and Becker Marine Systems
simplex-turbulo-logo
sterntube-seal-marine-spare-parts
turbulo-bilge-water-seperator
shaft-bearing

Sterntube seals

Simplex sterntube seals, made by SKF Marine, have been setting the standard for all other manufacturers since 1948. As the UK agent for SKF, we offer Simplex oil lubricated seals, Simplex water lubricated seals, and Bulkhead seals.

skf_logo-svg

Turbulo bilge water separators

Since the introduction of the IMO resolution MEPC 107 (49) all new vessels must be fitted with separators capable of breaking up emulsions according to the IMO test procedure. Our Turbulo bilge water separator TMPB, made by SKF Marine GmbH, gives the optimum balance in terms of function, capital cost, size and maintenance costs.

skf_logo-svg

Shaft bearings

In addition, together with our sister companies, Marine Propulsion Services and Maritime Propeller Repairs, we can maintain the complete propulsion system from the medium speed diesel engine to the propeller, as well as thrusters.  

skf_logo-svg
sterntube-bearing
SKF-rotary-vane-steering-gear
SKF-flange-with-supergrip-bolts

Simplex sterntube bearings

We supply and service a wide range of shaft components, including sterntube seals, sterntube bearings, shaft bearings, thrust bearings, shaft couplings and complete flexible sterntubes. Our team of experienced, factory trained engineers are available to service this equipment anywhere in the world throughout the year.

skf_logo-svg

Steering gear

SKF Marines rotary vane steering gear can be used for any rudder design and is the optimum solution for vessels with restrictions in available space as well as for all kinds of naval vessels. Since 1985, SKF Marine has supplied more than 80 steering gear systems of the double or single rotary vane type worldwide.

skf_logo-svg

Shaft couplings and bolts

Mounting and dismounting shaft couplings can be time-consuming operations that take hours or even days to complete. SKF OK Couplings can significantly reduce the time required to connect rotating shafts and flanges in heavy equipment such as large gearboxes.

skf_logo-svg
sterntube-seal-net-protection
skf-marine-stabiliser
SKF-Flexitube

Net protection

We offer two systems of net protection, which can either be used separately or installed together, if additional protection is required for operation in waters with a dense presence of fishing lines. Both systems can be retrofitted provided there is sufficient space.

skf_logo-svg

Stabilisers

Simplex-Turbulo supplies both fixed-fin stabilisers and two types of retractable stabilisers. The fixed-fin stabiliser is suitable for hull shapes where the fin will not protrude beyond the rectangle of the ship’s frame. Retractable Type S stabilisers represent the best solution for larger passenger ships, ferries, special vessels and yachts, whereas the Type Z retractable stabiliser can provide zero-speed stabilisation for vessels up to 200m.

skf_logo-svg

Flexitube

Complete sterntubes with white metal bush bearings, fully piped and ready to install. Design allows compensation of axial movement. These sterntubes are customised, complete sterntube seal solutions offering fast and simple installation and easy alignment with the highest possible level of industrially manufactured quality.

skf_logo-svg
becker-marine-rudder

© Becker Marine Systems

becker-mewis-duct

© Becker Marine Systems

bims-diagram

© Becker Marine Systems

Rudders and manoeuvring systems

Hamburg-based Becker Marine Systems is the market leader for high-performance rudders and manoeuvring solutions for all types of vessel. There are many designs to select from in order to optimise the rudder system to your particular application.

becker marine systems logo

Becker Mewis Duct® and Becker Twisted Fin®

The Mewis Duct® is an innovative energy-saving device for full form, slower ships. This device allows either significant power savings at a given speed, or alternatively allows the vessel to travel faster at any given power level. The Twisted Fin® is a design suitable for vessels with a finer hull form.

becker marine systems logo

Becker Intelligent Monitoring System (BIMS)

BIMS is an innovative development which optimises rudder movements, reducing drag and preventing stalling. The new technology monitors the forces and torque on the rudder while processing and storing the data in a computer unit. By using standard computer interfaces the unit is integrated into a vessel’s network. Additional information provided by the BIMS system can be used to improve and refine navigation, positioning, performance control and load monitoring, and to reduce fuel consumption.

becker marine systems logo
Freshwater Generator

Freshwater generators

These Freshwater generators work with any heating waste (hot water, steam, thermal oil, etc) to produce high quality distillate water increasing the energetic efficiency of the installation. Any type of water can be used as source like: sea water, brackish, surface waters, etc.